Moxa EDS-518A série

Switch manageable 16 ports 10/100 TX  +  2 ports Gigabit SFP/RJ45

Standards
IEEE802.3, 802.3u, 802.3x, 802.1D, 802.1W, 802.1Q, 802.1p, 802.1X, 802.3ad, 802.3z
Protocols
IGMP V1/V2/V3 device, GMRP, GVRP, SNMP V1/V2c/V3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON
MIB
MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control
IEEE802.3x flow control, back pressure flow control Interface
 
Interface
RJ45 Ports
10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speed
Fiber Ports
100BaseFX(SC/ST connector), and optional
1000BaseSX/LX/LHX/ZX (LC connector)
Console
RS-232 (RJ45)
LED Indicators
PWR1, PWR2, FAULT, 10/100M (TP port), 100M (Fiber port), MASTER, COUPLER
Alarm Contact
Two relay outputs with current carrying capacity of 1A @ 24 VDC
Digital Input

Two inputs with the same ground, but electrically isolated from the electronics
+13 to +30V for state “1”

-30 to +3V for state “0”

Max. input current: 8 mA
 
Optical Fiber
100BaseFX
Distance
Multi mode:
0 to 5 km, 1300 nm (50/125 μm, 800 MHz*km)
0 to 4 km, 1300 nm (62.5/125 μm, 500 MHz*km)
Single mode:
0 to 40 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km))
0 to 80 km, 1550 nm (9/125 μm, 19 PS/(nm*km))
Min. TX Output

Multi mode:
-20 dBm
Single mode:
0 to 40 km, -5 dBm
0 to 80 km, -5 dBm
Max. TX Output
Multi mode:
-14 dBm
Single mode:
0 to 40 km, 0 dBm
0 to 80 km, 0 dBm
RX Sensitivity
Single mode:
-36 to -32 dBm
Multi mode:
-34 to -30 dBm
 
Optical Fiber
1000BaseSX/LX/LHX/ZX
Distance

Multi mode:
1000BaseSX
0 to 500 m, 850 nm (50/125 μm, 400 MHz*km)
0 to 275 m, 850 nm (62.5/125 μm, 200 MHz*km)

1000BaseLX
0 to 1100 m, 1310 nm (50/125 μm, 800 MHz*km)
0 to 550 m, 1310 nm (62.5.125 μm, 500 MHz*km)
Single mode:

1000BaseLX
0 to 10 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km))

1000BaseLHX
0 to 40 km, 1310 nm ((9/125 μm, 3.5 PS/(nm*km)))1000BaseZX
0 to 80 km, 1550 nm ((9/125 μm, 19 PS/(nm*km))

Min. TX Output
SFP-1GSXLC: -9.5 dBm
SFP-1GLXLC: -9.5 dBm
SFP-1GLHXLC: -4 dBm

SFP-1GZXLC:

 0 dBm
Max. TX Output
SFP-1GSXLC: -4 dBm
SFP-1GLXLC: -3 dBm
SFP-1GLHXLC: +1 dBm

SFP-1GZXLC:

 +5 dBm
RX Sensitivity
SFP-1GSXLC: 0 to -18 dBm
SFP-1GLXLC: -3 to -20 dBm
SFP-1GLHXLC: -3 to -24 dBm

SFP-1GZXLC:

 -3 to -24 dBm
 
Power
Input Voltage
24 VDC (12 to 45 VDC), redundant dual inputs
Input Current (@24V)
0.67A (EDS-518A),
0.78A (EDS-518A-MM, EDS-518A-SS)
Connection
Two removable 6-pin terminal blocks
Overload Current Protection
Present
Reverse Polarity Protection
Present
 
Mechanical
Casing
IP30 protection
Dimensions
95 x 135 x 140 mm (W x H x D)
3.74 x 5.31 x 5.51 in. (W x H x D)
Weight
1630 g
Installation
DIN-Rail, Wall Mounting (optional kit)
 
Environmental
Operating Temperature
 0 to 60°C (32 to 140°F)
-40 to 75°C (-40 to 167°F) for T models
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
 
Regulatory Approvals
Safety
UL508, UL60950, CSA C22.2 No. 60950-1, EN60950-1
Hazardous Location
UL/cUL Class I, Division 2, Groups A, B, C and D
ATEX Class I, Zone 2, EEx nC IIC (Pending)
Maritime
DNV, GL
EMI
FCC Part 15, CISPR (EN55022) class A
EMS
EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 2
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-8
EN61000-4-11
Shock
IEC60068-2-27
Freefall
IEC60068-2-32
Vibration
IEC60068-2-6
MTBF
240,000 hrs
Database: Telcordia (Bellcore), GB
Warranty
5 years